Back-illuminated Cooling Mono camera MSH12-BI

The back-illuminated scientific-grade sCMOS camera MSH12 achieves a perfect balance of high resolution and high sensitivity, maximizing signal detection. In addition, it combines the capabilities of high speed and wide dynamic range, and can be widely used in materials and life sciences. , such as low-light imaging, fluorescence imaging, spectral imaging and other fields.

Category:
Share:

Get Exclusive Offers and Updates!

    Description

    MSH12-BI is a high sensitivity camera with back lighting technology, it achieves the most possibility to detect signal, keep high frame rate and wide dynamic rang. Big size 1.2 inch sensor offers wider field of view and and better quality image. This camera is good to use for life science and material analysis, such as weak light imaging, fluorescence imaging, spectral imaging and so on.

    Feature

    Monochrome camera with super QE:

    Monochrome camera has higer quantum efficiency (EQ) and popular to fluorescence microscopy imaging. QE is the probability of photons converted into photoelectrons at a certain wavelength, which is related to the wavelength. The quantum efficiency of MSH12-BI back illuminated scientific research camera, has been greatly improved, QE has reached 95% at the wavelength of 560nm.

    Back illuminated technology CMOS sensor:

    In the traditional sensor with front illumination structure, the photosensitive diode is located behind the circuit transistor, so the light input will be affected due to shielding, and the photosensitivity will be reduced and the photosensitivity will be weak. MSH12-BI adopts back illuminated CMOS, and the sensor with back illuminated structure moves the photosensitive layer above the conductive layer, which changes the traditional structure. The whole photosensitive layer is more sensitive to the incident light, and achieves better brightness, noise control and sensitivity.

    1.2 inch provides wider field of view:

    The 1.2 inch large chip has larger photosensitive area and better imaging effect, which brings a larger field of vision for the observer and provides a more direct full field observation effect.

    Sample images:

    Specifications

    Item MSH12-BI
    Type Monochrome
    Effective megapixels 4.2 megapixels
    Sensor size 1.2inch
    Pixel size 6.5 um × 6.5 um
    Resolution and frame rate 2048 × 2048 @74fps(11 bit)/@43fps(12bit)
    1024 x 1024 @74fps(11 bit)/@43fps(12bit)
    Any size of ROI
    Scanning mode Progress scan/Continuous output
    Shutter type Electronic rolling shutter
    Exposure time 12μs ~ 2600s
    Effective gain 1~16X
    Exposure response 200nm ~ 1100nm
    A/D converter 16Bit
    Cooling mode Peltier cooling mode, lower than room temperature 40°C
    Exposure function Manual exposure / Auto exposure / Zone exposure
    Image format TIF, BMP,JPG,RAW
    Image cache 128MB
    Trigger mode Software trigger
    Software data DirectShow / TWAIN
    Operating system Windows XP 32Bit, Windows 7/8/10 32/64Bit
    Data port USB3.0 B type port,5Gbps
    Camera port Standard C mount
    Power supply USB 5V electrical supply
    Working temperature Working temperature:0~40℃;Working humidity:10%~85%RH
    Size 100 x 100 x 75 mm

    Resources

    You may also like…